目前分類:格友拼布分享 (164)

瀏覽方式: 標題列表 簡短摘要

本文引用自bonita6723 - [璇咪小舖-拚布館]韓國美圖分享-貴婦包

 

7feabef9td147acd35997&690 

喜歡嗎? 引用就送囉~
分享辦法如下:
一、請完整【引用】此篇文章。
(1)先複製此篇文章
(2)按下文章下方的"我要引用"即出現"發表文章"視窗
(3)在"內容"貼上您剛複製的文章、再行編輯,最後按下"立即發表"即可。
二、在此篇【回應】留言告知已引用。
三、等待回覆密碼。
 ********************************
如果格友完成作品, 歡迎回娘家唷~

jane 發表在 痞客邦 留言(2) 人氣()

本文引用自yoyo20001027 - 立體折花檸檬星作法分享

立體折花檸檬星作法分享

網站上看到這個美麗的圖案~還有詳細的圖文分享~茲摘錄如下~

 http://www.modabakeshop.com/2011/09/fancy-folded-star-pot-holder.html

Fancy Folded Star Pot Holder

 

 

 

 
Hi again everyone! It's Maria from Not Only Quilts and I'm so happy to be back here at Moda Bake Shop to share my third tutorial with you all. This time we'll be making a really fancy pot holder!

"Just a pot holder?" you say. "How boring!"

Well, this pot holder is anything but boring; it's fancy and fun to make. =)

And the folded star technique you learn here can be used for so many other things: make it bigger for a pillow cover or make it smaller for an adorable ornament!  It's the perfect way to use a few spare fat quarters for a gift. I recommend you read the entire tutorial before beginning this project.
 
學會這個圖形作法不僅可以做個簡單的鍋墊~也可以放大成抱枕套~或縮小當個吊飾~當成禮物也不錯~建議 您運用想像力變化成更棒更適合的作品.
準備材料:
 

6 Fat Quarters (Flurry by Kate Spain)
六色方形棉布
Disappearing marker
水消筆
Color matched thread
車線
Cotton batting
鋪棉

作法介紹

Step 1 - Selecting fabrics
Choose 4 FQ's (Fat Quarters) that coordinate nicely: these will be your star.
 


And choose 1 FQ for backing, and 1 FQ for drawing, and sewing on.
 
挑選四塊布 作為星星用布
一塊當背布
一塊當畫線用用底布 屆時會把星星縫上

Step 2 - Cutting 裁布
 
 * Cut (1) 10" x 10" square from your backing fabric and (1) 10 x 10" of your drawing and sewing fabric. For one of these squares I substituted the drawing and sewing one with an ugly fabric from my scrap bin as it won't be visible when we're done). That's all we need and the rest can be placed in your scrap bin.

 * We will cut each of the 4 FQ's we selected for the star into (16) 3" x 4" pieces.
First cut (3) 4" strips from the 18" long side of your FQ. We do it from this side to get as much leftover fabric as possible. Then sub-cut these strips in 3" sections until you have 16 (you will get 18 from the strips through). Repeat this for all 4 FQ's.
 
背布與畫線用用底布各裁10"*10" 正方形
四塊星星用布分別裁成16塊3"*4" 大小 
四塊都是所以共有64塊3"*4"大小的布片



* From the fabric that you choose as your bottom fabric (see step 5), cut two 5" squares. Split them in half diagonally so you end up with 4 triangles.


* Use the leftovers from one of the star FQ's for binding.
 
 



Step 3 - Drawing
On your background square, with a ruler and a pen, draw lines from corner to corner, and then from middle to middle, like this.

 
將畫線用底布如上圖畫線作記號
分成八等份


Step 4 - Ironing
 
接下來開始一步一步慢慢來 一定可以完成的 加油

Bring your 64 rectangles over to your ironing board. On the 4" long side, fold down about a 1/4 inch towards the wrong side of the fabric and iron it. Do this for all rectangles; it gets a little repetitive, yes...

 
將小布片在4"那邊往裡折燙1/4"
64片都是
 


Step 5 - Select layout
Now we're going to select the layout of our star. Here are some of my test versions. You should have 8 pieces in the layout, 2 of each fabric. I ended up going with #1 because it felt nicely tied together when it started and ended with the same color and slowly faded to blue and back to green.

 
排出星星輪廓
每組共八片
二組二組重複排列共有八組


Step 6 - Creating the star base
Now we're going to start making the star. First we need to get all the pieces in place, keep the test version you decided to go with next to you when doing this for reference, as it's easy to accidentally get the fabric in the wrong order.

Start with the vertical line; place your centerpiece exactly by the horizontal line the fold at the line, right side up while still centered over the vertical line. A scant ½" down, place your next piece and pin in place, this distance has to be the same all around your star so it's very important you keep it still.  In my photo below, you can see my reference pile next to it. =)

 
開始第一組
每一片距離1/4"
用珠針固定
距離要一致 星星才不會偏移
 
 

Place the rest of the pieces a scant 1/4" down from each other's edges and pin in place. Try to keep this measurement the same all around your star since your star will be wonky otherwise.

Repeat for the other side of the line until you have this. Make sure the top pieces on each side touch but don't overlap. This is very important.

 
 
對面也是一樣對稱排列

Draw a line in the middle of your pieces (5" in from the edge) using a disappearing marker and sew along the line using your walking foot - otherwise you risk your pieces shifting. Choose a thread that blends in nicely with your bottom fabric (in my case, the solid green) because it will be most visible there.

 
 
在中間車一條線

Remove the pins from your first row so you can flip the fabric from side to side. Complete your second row using the exact same measurements, carefully folding away the already stitched in place row and keeping your top piece touching them, but not overlapping, like this.

 
左右二邊也是
一樣排列
中間車一道線
移除珠針
 

Draw your centerline with the disappearing marker and sew in place. This time you have to first sew one side, and then the other so backstitch a few stitches in the center.
可以在布上先畫線作記號   確保部片排列整齊 才能摺出漂亮星星

Now we've come to the diagonal rows. This is where it get's a little bulky but as long as you take your time to make sure that the center of your top fabric really meet the others without overlapping, you will be able to get a beautiful star.

 
對角二邊也是分別
一樣排列
中間車一道線
 

Do this for all 4 diagonal lines. Draw a centerline (you can draw it from the middle fold to the drawn line on your background fabric) and sew in place.  Voila! You've sewn all of your pieces in place. Now it is time for folding! =)
 
八組車好完成
開始準備折星星
接下來看圖一步一步慢慢折 
祝你順利成功  手作愉快


Step 7 - Folding your star
This step might seem complicated but it really isn't, it just requires patience and maybe one or two practice folding rounds. So the first time, you might want to just pin in place and see where that leaves you because it can be a little tricky to get the folds even the first time.

Many of the written descriptions below can seem very confusing, however, just click the photo below them and enlarge it and it should become crystal clear what I'm trying to get across. =)

Separate two piles of fabric by flipping them to the sides, like this.


Starting on your right hand side, take the top piece, fold it over, wrong side towards wrong side so you get a triangle with a little leftover at the bottom. Enlarge the photo below and you'll see exactly what I mean.


Lie it down towards the scrap fabric like so.


And fold it back over towards the seam again, right side to right side and the first fold is done!


While holding onto your right side fold, do the same thing to the left one. Fold it wrong side towards wrong side.


Lie it down towards the scrap fabric and then fold it back over towards the seam on the left side.


And the first star center is complete! Now we only need to do the single folds for the rest of the pieces.

On the right side (always start from the same side), fold it down, wrong side to wrong side like we did with the first two pieces.


Then simply lay it over your already folded pieces.


Fold the left one the exact same way.


 

While holding the one's you've already folded in place, fold the next layer too.


Pin in place.

And then sew a sort of V shaped row of stitches, high enough to secure all three layers but away from the parts that will be visible when folded, like this.


Fold two more and stitch again.


And repeat. Make sure you remove all pins after sewing because it will be very difficult to retrieve them afterward. =)

For the last fabric, only pin in place... don't sew yet.


Repeat 8 times, until the star is ready. Admire your hard work a little before continuing.


Now you can add batting and backing, sew around the edges, and cut a circle to make a round potholder. I preferred a squared one so I'll be attaching some corners to it.


Step 8 - Finish the front
Now we're going to take the 4 triangles we've already cut and use them to make our piece square. I made them big so no matter how you've folded, they should cover your ends. I can't give you exact measurements here as it depends a little on how far apart you've placed your pieces and how you've folded. So here we do a little trial and error. Place your triangles wrong side up far enough up to cover the folds of your star but low enough to cover the corners when folded down, again a couple of pictures are more explanatory I think:


Before stitching, flip over your pinned triangles to make sure they cover all they should, like so:


Stitch along your pinned rows to get them in the correct position. Trim off the triangle edges sticking out.

Step 8 - Back, batting and quilting
Add batting (I use just one layer of normal cotton batting, this potholder has so many layers of fabric, you really don't need any extra protection from heat when using it) and backing to your little potholder. Baste and quilt as desired, I choose to do a simple echo of the star shape.

Step 9 - Binding
I know most of you already know how to do this, so then just skip this part and bind with your preferred method. But I remember from making my very own first potholders how difficult it was to get a decent looking edge and hanger on the darn thing, so in case there's anyone else out there like me a few years back, this section is for you =)

Cut two  2" long strips from your desired binding fabric from the 18" end, join them to make one continuous binding strip.  We're going to make single fold binding, so 2" wide is wide enough.

Fold the strip in half, wrong sides together and iron it, then open it up and iron the edges towards the center fold, something like this. I know mine doesn't match perfectly (I got lazy and made it with my bias band maker).


Start in one corner of your potholder. On the wrong side of your potholder, pin your binding wrong side up from the very end and start sewing from the top. Use a 1/4 inch seam allowance.

 

Sew until you're a 1/4 inch away from the bottom edge. Backstitch and clip your thread.


At the corner, fold back your binding to a 45 degree angle, like so:


Fold it back at the right edge down towards the next side you're about to sew. Again, this sounds more complicated then it is. Just look at the photo and then you start your stitching 1/4" from the edge where the little arrow is, it will be exactly in line with your last row of stitching. Be careful not to catch your fold with your stitching when backstitching.


Continue around 3 corners but don't do the last one, so you'll end up with these flips on 3 corners.


When you come to the last corner, stop an inch or so before the end. Take the starting point binding and pin it in place around the front.


Sew the final inch or so all the way to the edge.


You should have a fairly long piece leftover at this point. You can now shorten it to 4" sticking out over the edge.

Fold over your binding and pin in place, making sure you get pretty 45 degree corners as you go. I'm normally very lazy and never pin my bindings, but for this part of the tutorial I wanted to show the recommended way of doing it when you're a beginner - to ensure an even and nice looking binding as it easily slips away from you when machine sewing it in place if you're not used to it. =)


Before you sew it all in place, take the hanger piece sticking out and fold it back over itself, right sides together, and 1/8" from the edge, sew a few stitches back and forth to close it.


Flip it back and into the fold with the seam like so.


Now start stitching at the end of the hanger, closing it off as you go and follow it all the way around. Stop a few inches from the end and flip the hanger underneath the end so you make the little loop with the same seam as you end the binding.



One ~10" big, super fancy folded star potholder! A lovely but usable decoration for your own kitchen, or the perfect gift for the person who has everything!





I hope you've enjoyed reading this tutorial as much as I enjoyed making it! If you end up making one of these, I'd love to see it! Please send me an email {maria@idztech.com} with a picture, as I'd be so happy to  feature it on my blog =)
 
Maria Wallin

jane 發表在 痞客邦 留言(3) 人氣()

紅包袋(零錢卡片袋)分享篇(一)



 




 


 


紅包袋(零錢卡片袋)分享篇()                 jane 2013.01.25


 


 


在我玩布的理念中,布作應該和生活結合,一切以"實用"為優先考量,


中看不中用的作品,偶爾玩玩怡情養性就好,不知各位好朋友覺得如何?


這個小包符合歐巴桑務實的要求,有多功能的用途,眾姊妹都說"好"!


現在將做法照片整理好,請大家參考 ………


 



製作前請先依照紙型圖示(尺寸修修改改標示有點醜,請多見諒)


用紙張試折出成品模樣



1.貼襯,A&D貼厚襯,B不貼,C貼薄襯,還有補強四合釦位置的硬襯




2.從星星記號線開始燙折,這個位置是夾車拉鍊上方用



3.再折出夾車拉鍊的下半部,拉鍊的寬度只留1cm,注意別車太寬喔


4.接著燙折出後方的夾層,這樣就看出成品的形狀了




5.開始車第一道拉鍊,直接放在袋口下方,壓線車縫,車一或兩道線都可




6.第二道拉鍊是塞在折痕裡車縫



   


    請看分享篇(二) ...........


 



7.後方夾層記得壓一道線比較平整



8.調整一下位置,先固定拉鍊袋兩邊,畫出袋蓋弧度



9.袋蓋疏縫,修剪整齊



10.包邊,釘上四合釦,就完成囉


 如果側邊想打雞眼加上珠鏈也是不錯的


 


建議事項:


1.別用太厚的布,雖然已將縫份儘量錯開,折疊後還是很可觀


  棉布又稍嫌單薄,用厚質布比較適中


2.如果想要表蓋硬挺一些,A區可以貼薄的挺襯(防水布夾中貼卡片那種)


3.使用4"( 10cm ) 拉鍊


4.滾邊直線部份輕鬆擺放,袋蓋弧度就要放鬆囉,不要拉緊


5.距離袋蓋邊緣1.5cm釘四合釦 ( 1.25cm )


 先打袋蓋母釦,再試蓋決定公釦位置


6.如果要做許多咖,可將同色系的布料,一次裁剪、折燙、統一車縫


 省去換線的麻煩,速度會快很多


 


有興趣的朋友可直接試我的尺寸,


如果覺得做法不錯,也歡迎引用介紹給其他朋友們,


自己動手,不必問我囉 (*^_^*)


祝各位好朋友,新年快樂!






 


jane 發表在 痞客邦 留言(0) 人氣()

[璇咪小舖-拚布館] 紙型分享-西裝外套短夾 (另售材料包)





\


 





雖然父親節剛過, 但卉芸還是想來分享這個紙型~ 
喜歡嗎? 引用就送囉~


分享辦法如下:


一、請完整【引用】此篇文章。


 


(1)先複製此篇文章(2)按下文章右下角的"我要引用"即出現"發表文章"視窗


(3)在"內容"貼上您剛複製的文章、再行編輯,最後按下"立即發表"即可。


 


二、在此篇【回應】留言告知已引用。


三、等待回覆密碼。


 ********************************


如果格友完成作品, 歡迎回娘家唷~


jane 發表在 痞客邦 留言(0) 人氣()

18*4 支架口金筆袋紙型分享



 




有沒有很公主風ㄚ~~~


尤其配上夢幻的粉紅色塑鋼拉鍊


哈哈~~一看就知道不是我的菜


 


 


 



 


 




因為買不到28公分的塑鋼拉鍊,所以用30公分的來加工


 


 


 





把前,後端先以手縫方式摺入


 


 


 




筆袋的做法..........................省略100個字


 


 


 


 





內部照


 


 


 




公主風筆袋完成囉


 


 


 


 


 






哈哈~~~一堆廢話後,重點來囉,有需要的請自取喔(縫份請外加)


 


延伸閱讀:18*4  支架口金筆袋



 



 


18 *4 口金筆袋紙型分享 part 2


 



18*4 支架口金小故事



 


 


謝謝觀賞


jane 發表在 痞客邦 留言(0) 人氣()

蘇姑娘的歷史故事




 


 


蘇姑娘的歷史故事

 

看到大家對蘇姑娘的熱爱,大家應該也對蘇姑娘身世的好奇。


Bertha Corbett Melcher - 被稱作"帶著太陽帽的孩子們“之母。


當初,Bertha Corbett  想證明给她藝術界的朋友們,


 


人物的臉不是一定要暴露出來才能達到表答的目的.


 


她勾畫了一些面容完全被大大的太陽帽遮蓋的小姑娘們


 


 這 些就是她的"帶著太陽帽的孩子們"一書的原創.


 


1900年,她的“帶著太陽帽的孩子們”書上市


立刻受到人們的喜愛。她的這些設計頻繁地出現在明信片上,瓷器上,


 


特别是在拼布藝術上。


 


Bertha Corbett Melcher 28 歲時照片:


 



Bertha L.Corbett 生於美國丹佛,


曾就讀於明尼阿波利斯藝術學校


和費城Howard Pyle,後來在芝加哥完成了她的學業.


   


她後來移居加州洛杉機,嫁给George H. Melcher.


他們一直經營著的聖塔莫尼卡衣廠,


直到 1950  Bertha Corbett Melcher去世。


 


下面這張照片是Bertha Corbett Melcher 


40多歲時,那時她已經得了嚴重的關節炎:




 


以下是她的一些著名的水彩畫:


 




 




 




 




 




 





 


jane 發表在 痞客邦 留言(0) 人氣()

面紙包手作分享



 


包包裡隨身攜帶的面紙包


不知道大家有沒有相同的感覺


面紙包經常一拆封之後  開口就容易裂開


甚至容易扭捏成團


拿出來使用時  也不太好看吧!


今天Mindy就分享它的作法


會做的朋友請不吝賜教


想學的朋友請跟著我一起動手做


沒有縫紉機的朋友  手縫也可以呦~~


 


 



* * * * * * * * * * * * * * * * * * * * * * * * *


 


首先裁剪兩片18*13 cm ( 縫份外加) 的表布和裡布


要加布標或蕾絲 都隨自己的喜好ㄛ


 


 



在13cm的兩邊車縫




如圖示




然後取中心點疊成8字形  要對準中心ㄛ




接著車縫一邊   另一邊則車縫一半 如圖示




再車縫表布的另一半  如圖示     裡布不車 這個是做返口用




 




最後翻至正面  縫合返口  完成!


很容易吧! 




這個旅行款的面紙包超好用


它不像小包面紙 抽個兩下就沒了!




將! 將!  我也幫它做了一件衣服


小包擺在它旁邊 更顯得它的大小囉!


它的裁剪尺寸是 28 * 19cm  縫份外加




 


多做幾個送給朋友或自用 都粉不錯滴~~




 


記得拿零碎布來利用 再好不過囉!




 




 




哈 !  哈  ! 從此以後面紙包再也不會醜醜的拿出來見人囉




 


 


 


jane 發表在 痞客邦 留言(0) 人氣()

簡易手拿包快速作法分享





多年前曾經分享過懶人化妝包的作法 ,


懶人化妝包作法


那時候剛開始玩英國防水布 , 很多車縫技巧都還在摸索中


還沒開始用碼裝拉鍊 , 用定吋的拉鍊 , 車縫前還要用雙面膠黏一黏固定


現在這些都不用ㄌ  , 做法更easy ,


因為這種包我已經作ㄌ太多個 , 實在是送禮做公關的好選擇 ,


隨時做幾個在身邊 , 有朋友客人來時當貼心小禮 ,


熟能生巧唷!! 有機會大家試一試吧!


 


分享一下我現在做化妝包的方法 ,


非科班專業做法 , 完全隨性依照自己想要的方式完成 ,  


照片漏漏長 , 是為了讓偶小學同學(剛開始玩包 , 自稱是手作幼幼班看清楚)


同學 , 希望你有看懂唷!  請笑納!!


 


材料:  下面紙型表布*2  ( 有人可以教我放在網路 , 讓大家自己去下載的方法嗎?)


             裡布*2 (呎吋可稍小一點點)


             碼裝 拉鍊 22 cm *1


            布標0r皮標 *1


             D 環*1


 


 


 


所有材料


 



 


碼裝拉鍊頭尾拔齒各4顆


 


 


 


拉鍊放於表布上 , 注意拉鍊齒朝下


(塑鋼拉鍊沒有分正反面 , 勇敢的把它擺下去 ,不必擔心車反ㄌ) 


 


 


 


 


裡布再放於拉鍊上 , (表布與裡布正面要對正面唷!)


 


 


 


 


用夾子固定一下 , 準備車縫 ( 現在我不用雙面膠先固定拉鍊ㄌ)


 



 


換拉鍊壓布腳 , 車縫一直線


 


 


 


翻回正面如圖 , 以骨筆將表布固定準備壓線 ( 沒有骨筆用手也行啦!!)


 


 



 


壓線 ( 我習慣裡布不壓線唷 ,要攤開來如下圖)


有試過將裡布一同壓線 , 發現成品的拉鍊兩端會股股的,不喜歡


裡布不壓線的完成作品 , 拉鍊兩端收尾較美麗 , 於是我都改這樣做


姐妹們自己斟酌要如何做ㄌㄡ


 



 


壓好線ㄌ , 另一塊相同做法


 



 


兩片皆完成拉鍊


 


 


裝上拉頭


 





 


~~~~~~~~以上為碼裝拉鍊之作法~~~~~~~~~~~~~~


 


還沒試過碼裝拉鍊的朋友們 , 趕快試一試吧!! 省事不費工ㄋ!!


定吋拉鍊請看這: 定吋拉鍊車縫方法  卡麻煩一些!! 一直抬壓腳 , 拉拉頭 


表布及裡布底角打摺處理 ( 此步驟亦可於裝拉頭前完成)


 



 


對摺


 




沿記號線車縫


 



 


剪掉多餘尖角處如下圖


 



想加側標及D環的話 , 先固定好 ,



 



 



 


表布正面對正面 , 裡布正面對正面 ,  注意接合處要對齊


 



 


底角打摺處縫份往不同邊倒


 



 


四周固定如下圖 , 準備車縫一整圈


 



 


從裡布下緣開始車縫 , 起針處記得回針,  中間留約10 cm 不縫當返口用 ,


 



裡布留10 cm 不縫



 


縫份修剪剩0.5cm ,


 




拉鍊頭尾縫份可修剪多一些 , 翻回正面會比較好看 , 弧度的地方也相同


 



 


由返口處 , 翻回正面


 



 



 


用錐子整理一下


 



 


手縫返口


 



 



 


三兩下就可以做一個唷!! 送禮的好選擇!!


 



再來要換用帆布做幾咖...


喜歡儘管帶走不必問!!   有問題再來討論唷!


jane 發表在 痞客邦 留言(1) 人氣()

【小小分享】Tetra Pak新鮮屋再利用~~簡易零錢盒





這零錢盒是五金材料店的老板娘分享的,


利用喝完後的飲料紙盒(Tetra Pak新鮮屋)做的,


環保再利用,感覺還不賴唷~~^^




打開的樣子


 



放入零錢


 


【有興趣的朋友一起動手玩看看^^】



準備1個喝完的新鮮屋空瓶


在4面分別由底部下往上,畫上下列的標示尺寸:


A面:3.5cm、3.5cm、7.2cm


B面:3.5cm


C面:7.5cm、2.5cm


D面:3.5cm


 



將畫好尺寸的紙盒剪下,


圖為剪好的形況。


 



順著標示的記號線折入


ps.記得使用消失筆畫記號線,不然會影響美觀唷!!


 



A面折好的樣子


 



C面折山後,兩邊的角可以稍為修一下


 



B、D兩面分別標示中心點(紅箭頭處)


兩面同時往內折入




釘上四合釦就完成簡易的零錢紙盒包囉~~
Enjoy it~~





 






 

jane 發表在 痞客邦 留言(1) 人氣()

好康分享--韓網可愛拼布 圖紙



 


對岸博客裡看到的,蠻可愛的~ 有附圖紙哦~


有興趣的姐妹可以去看看~


一樣花開


韩网图片---- 甜蜜爱 图纸



 




思思家布童話



飞机上的小两口 韩国图纸





jane 發表在 痞客邦 留言(0) 人氣()

俏皮貓頭鷹。手握/掛鑰匙包【有做法分享】




2013/04/19 17:28




 


好可愛討喜的貓頭鷹鑰匙包耶~~


當初覺得霧面防水布很好車就亂買的布~~沒想到效果很棒呀!!


DSC06918.JPG


 


打開~~除了六排鑰匙鈎,還另外設計有很多卡夾層哦!!


胖咪有想辦法讓布澎澎挺挺的,使用起來絶不會軟趴趴不好用哦


DSC06919.JPG


 


可掛/可提/可手握~~有條帶子就多了很多種拿法


DSC06924.JPG


 


DSC06921.JPG


 


可全開~~


DSC06922.JPG


 


也可半開~~好像當成了L型拉鍊包來使用吔~~


DSC06923.JPG


 


當初客訂時,我還一直煩惱做得出來嗎?? 手邊的書又都沒有類似客人要求的包,


在拔了很多根白髮後終於~~~~生出這個好好用的鑰匙包!!


 


有人也想試試看做做看嗎?


胖咪就當成今年的母親節禮物分享給大家哦!


 


做法會在母親節之前生出來的


所以留言分享的朋友要等胖咪把做法弄好就會回覆哦


 


跟以前一樣:


分享辦法如下:


 


一、請完整【引用】此篇文章。


 


(1)先複製此篇文章(2)按下文章右下角的"我要引用"即出現"發表文章"視窗


(3)在"內容"貼上您剛複製的文章、再行編輯,最後按下"立即發表"即可。


 


二、在此篇【回應】留言告知胖咪已引用。


 


三、等待胖咪回覆密碼。


 


這次也會有  如何製版、如何計算拉鍊長度  的單元哦~


自己就可以隨意做出想要的大小囉!!


有興趣就一起來玩吧~~


 


 



 


jane 發表在 痞客邦 留言(0) 人氣()

快樂時光ㄇ型口金 紙型分享



 


 


話說 上次提到


若neko有多餘的美國時間


還是會分享其他東東






neko再不出來晃晃


大家還真會忘了neko 這號人物咩



 



 




所以這次特地逮住美國時間



趕快來分享這個ㄇ型口金包唷


 



妳喜歡嗎?


喜歡      就趕快來出個聲


歡迎舊雨新知      大家一起來唷







如何擁有它ㄋㄟ


                            1.一定要引用此篇文章   並回應悄悄話告訴neko您的Mail信箱


 


                                   為公平起見,未引用的姐妹们 neko會請您引用後再傳給您紙型


 


                                  新朋友格內一定要有您的文章及作品(不然neko只好對您抱歉囉!)


 


 


                          2.紙型開始發放日期:102年4月21日


 


                          3.分享截止日期  :  102年4月30日    止(截止不再分享! 趕快把握唷!)       


 


                         



                          4.包子包孫回娘家時間 : 102年6月15日前     


                                 為了以後的相約門票       趕快給它拼了啦!!


                                                                    




PS:給neko一咪咪時間


再po上作法唷


等我蛤....


 


 


 


 


 



 







 

jane 發表在 痞客邦 留言(0) 人氣()

胖咪的【支架型口金包製版過程】不藏私大公開囉




2013/04/09 14:22




(這咖是用25CM方型支架口金做滴~)


 


DSC06782.JPG


(這咖是用12CM圓型支架口金做滴--半成品啦~)


 


您會不會也有這種困擾....


會用書、或分享做出支架口金包沒問題,可是想做自己需要的大小卻大大有問題呢??


 


這次胖咪以25CM方型支架口金做示範打版,


只要是支架口金,不管圓的、方的都適用~


(有機會再分享另一種打版法~就是底部是圓底的^^)


 


快來幫家人、朋友、客人量身訂製一個好玩好用的口金包吧!


 


【步驟一】


拿出皮尺,量出單支支架口金的總長度。


例:25CM方型支架口金總長度為37.5CM,


但是口金邊邊要預留點空間,包覆性會比較好,


所以胖咪設定為39CM差不多。(38.5~39CM皆可哦)


DSC06780.JPG


 


【步驟二】


開始製版。


製出的版"不包含"縫份哦!


沒特別註明的話都是"對稱"畫法哦!


口金包紙型畫法.jpg


 


【步驟三】


使用《有拉鍊口布的製作法》的話,口布要裁 39+2CM縫份=41CM長,


寬度設定的話...與縫份有關,胖咪習慣縫份為1CM,


這樣我就會裁 41*4CM的口布4條


其中4CM是包含2CM的縫份,所以實際製作出來會是...拉鍊左右各2CM寬的拉鍊口布。


DSC06781.JPG


 


【步驟4】


決定拉鍊的長度,比39CM長個4CM的拉鍊長度最為理想。


在此示範包,胖咪是用45CM的拉鍊去製作滴。


DSC06790.JPG


以上,與大家分享胖咪自己的製版方法哦,


其餘的製作法可以參考林素伶老師的書<來玩支架口金包>~~好書一枚~~大推哦!!!


 



 






 

jane 發表在 痞客邦 留言(0) 人氣()

好康分享--分享韓國包包圖紙



 


前些時候做的傳情小情侶手機袋,有姐妹在問是哪個網站,只是一下子Judy找不到啦~


可是我還是沒有放棄哦~終於被我找到了,分享給大家~


由於找不到原發者,只好貼上轉載的網址,敬請見諒~


淞淞的博客--分享韓國包包圖紙









jane 發表在 痞客邦 留言(0) 人氣()

引用分享教程--自製熨台



 



原文地址:


http://blog.sina.com.cn/s/blog_6ec85bcc01013kxd.html


 

(☆ 材料及工具介绍 ☆




a、木板,四月用的是水果砧板,杂货店淘来的,很小巧,23cm*14cm*1cm


b、4mm铺棉(需要紧实的铺棉)


c、棉布,早期屯的日本花布,上面的图案正好是洗涤标志,做成熨台很适合


d、织带,要和木板的厚度一样,是1cm


e、白乳胶


f、刷子


 



 


g、花齿剪                  h、布剪                    i、水消笔


 


------------------------------------------------------------------------------------------


 


☆ 制作步骤详解 ☆


 



 


1、把木板放在棉布上,依照边缘画出木板形状


2、裁剪布料,四边各留1cm空间


3、四角用花齿剪剪出幅度


 



 


4、重复步骤1在铺棉上画出木板形状,按照图上虚线所示进行裁剪,一块减小2mm,一块剪大2mm


 



 


5、在木板的一面上涂抹白乳胶,不需要整块涂抹,随意刷几处几好,主要是固定铺棉用


6、放上铺棉(尺寸小的那块),用手压平


7、如图所示,第一层铺棉要比木板小2mm


8、在第一层铺棉刷上白乳胶,放上第二块铺棉,用手压平,如图所示,两层铺棉的效果


 



 


9、粘好铺棉后,在铺棉上放好棉布,整理平整,这里不要白乳胶粘合,布料和铺棉自然会有粘合度


10、翻过来,整下四边,是否预留尺寸一致


 



 


11、在木板的侧面一刷上白乳胶


12、用手压上棉布,使其与木板粘合


13、先粘合四个边(粘合过程中要适当拉紧棉布,使表面平整紧实)


14、再粘合四个圆角


 



 


15、棉布粘合待干后,再次在边缘刷上白乳胶


16、用织带包裹边缘


17、小型熨台即制作完成


 



 


我的两块自制熨台


蓝色熨台是一年前作的


已经使用有段时间了


我是个很迷糊的人


经常不知道工具放到哪里去了


于是空余的时间


就再做一个熨台


顺便记录制作过程与大家分享




 


熨板的反面也是有大用处的


四月没有手工台


很多时候都是在床铺和地板上


这个小板放在床铺上画纸型还是很好用的


 



 


近期自制的一些拼布模板


 



 


用自制的模板拼出的图案


还没想好要做成什么东西


且放着


练练手






 

jane 發表在 痞客邦 留言(0) 人氣()

18 *4 口金筆袋紙型分享 part 2



 






雖說kt 不是我的菜, 但是她的防水布還真是好好看喔


 


 


突然發現18*4的支架到處都買得到了耶


所以再來分享一個紙型


希望大家都能做出適合自己的筆袋


喜歡的朋友,請自取~~~不用客氣喔



 


 



眼尖的朋友會發現


這次的紙型和上次的不一樣


為什麼呢??


哈哈~~就是畫錯了


因為作上一個防水布筆袋時,為了取圖


一不小心高度少了0.5cm


所以ㄚ~~裡布就跟著減少0.5cm囉


不過, 成品的感覺沒差很多


看個人喜好囉


 


 


 


這次的學院風kt筆袋換了拉鍊的顏色


真的感覺又不同了


另一個彩虹kt,是二嫂的店的專賣防水布喔


 


謝謝大家的喜歡與欣賞


 


 


延伸閱讀


 



開工大吉之防水布筆袋



 

18 *4 支架口金筆袋分享


jane 發表在 痞客邦 留言(0) 人氣()

欢迎来参加内地手工活动(贴布爱好者不要错过噢)



内地的手工活动,这次有非常多的贴布缝图案哟,


每一个都超可爱的。


因为经常参加台湾的手工活动,也经常得到台湾朋友的帮忙,所以今天特地来广告一下。


活动的组织者是:风中的飞鸟。


她是很厉害的绘画者,手作也好棒,这次的原创希望大家能支持!


她的BLOG链接是:http://blog.sina.com.cn/s/blog_8f503df9010174d6.html


第一期的纸型可以自行下载,完成后再交作业领第二期作业。


**********************************


考虑到台湾的朋友不方便上QQ或是新浪BLOG,征得组织者的同意,


台湾的朋友可以直接给她发邮件交作业,


邮件的标题注意要注明是“台湾朋友交作业”。


她的邮箱是:41961882@qq.com  


以下是她原创的第一期作品:









大家互相帮忙,一起开始美丽的2013手作年吧。


jane 發表在 痞客邦 留言(0) 人氣()

分享-高雅貴婦包



 





新春獻禮~


對岸博客挖的寶~


圖片網路收集~侵權請告知刪除~


重申~這不是偶的作品喔~


原文地址:  收藏已久 (不詳) 





 




 



 









 

jane 發表在 痞客邦 留言(0) 人氣()

可愛的汽球女孩紙型分享






jane 發表在 痞客邦 留言(0) 人氣()

分享~韓風小房子長夾



 


對岸博客挖的寶~


圖片網路收集~侵權請告知刪除~


重申~這不是偶的作品喔~


原文地址:知悉感恩  http://blog.sina.com.cn/s/blog_69377b710102e1xy.html


 


類似款之 延伸閱讀~


韓風可愛小裙子長口金包


韓風可愛小熊衣櫃


喝下午茶的女孩


熱茶女孩書套


中國娃娃卡夾包













 


jane 發表在 痞客邦 留言(0) 人氣()